Hello, welcome ShenZhen DFLH Technology Co., Limited
Language：
XPON 1GE+3FE+POTS+WiFi ONU meets telecom operators FTTO (office), FTTD (Desk), FTTH(Home) broadband speed,
SOHO broadband access, video surveillance and other requirements and design a E/GPON Gigabit Ethernet products.
The box is based on the mature Gigabit E/GPON technology, highly reliable and easy to maintain, with guaranteed QOS
for different service. And it is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
Good third-party compatibility when used with third-party OLTs such as Huawei/ZTE/ Fiberhome/BDCOM/VSOL OLT.
► Support GPON mode and EPON mode
► Support Route mode for PPPoE/IPoE/Static IP and Bridge mode
► Support IPv4 and IPv6 Dual mode
► Support 2.4G WIFI and 2*2 MIMO
► Support SIP Proctol for Voip Service
► Support LAN IP and DHCP Server configuration
► Support Port Mapping and Loop-Detect
► Support Firewall function and ACL function
► Support IGMP Snooping/Proxy multicast feature
► Support TR069 remote configuration and maintenance
► Specialized design for system breakdown prevention to maintain stable system
Technical item | Details |
PON Interface | 1 GPON/EPON （Class B+） |
Receiving sensitivity: ≤-27dBm | |
Transmitting optical power: +0.5~+5dBm | |
Transmission distance: 20KM | |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/UPC Connector |
Design Scheme | MTK7525 |
Chip Spec | CPU 950MHz,DDR2 128MB |
Flash | SPI NAND Flash 128MB |
LAN Interface | 1 x 10/100/1000Mbps(GE) and 3 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
Wireless | Compliant with IEEE802.11b/g/n |
Operating frequency: 2.400-2.4835GHz | |
support MIMO, rate up to 300Mbps | |
2T2R,2 external antenna 5dBi | |
Support: Multiple SSID | |
Channel: Auto | |
Modulation type: DSSS, CCK and OFDM | |
Encoding scheme: BPSK, QPSK, 16QAM and 64QAM | |
POTS interface | 1 FXS, RJ11 connector |
Support: G.711/G.723/G.726/G.729 codec | |
Support: T.30/T.38/G.711 Fax mode, DTMF Relay | |
Line testing according to GR-909 | |
LED | 10 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN4、FXS |
Push-Button | 3,For Function of Reset, WLAN, WPS |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%～90%（non-condensing） | |
Storing Condition | Temperature: -30℃~+60℃ |
Humidity: 10%~90%（non-condensing） | |
Power Supply | DC 12V/1A |
Power Consumption | ≤6W |
Dimension | 180mm×107mm×28mm（L×W×H） |
Net Weight | 0.2Kg |
2. Panel lights Introduction
Pilot Lamp | Status | Description |
WIFI | On | The WIFI interface is up. |
Blink | The WIFI interface is sending or/and receiving data (ACT). | |
Off | The WIFI interface is down. | |
WPS | Blink | The WIFI interface is securely establishing a connection. |
Off | The WIFI interface does not establish a secure connection. | |
PWR | On | The device is powered up. |
Off | The device is powered down. | |
LOS | Blink | The device doses not receive optical signals or with low signals. |
Off | The device has received optical signal. | |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. | |
Off | The device registration is incorrect. | |
LAN1~LAN4 | On | Port (LANx) is connected properly (LINK). |
Blink | Port (LANx) is sending or/and receiving data (ACT). | |
Off | Port (LANx) connection exception or not connected. | |
FXS | On | Phone has registered to the SIP Server. |
Blink | Phone has registered and data transmission (ACT). | |
Off | Phone registration is incorrect. |
Product Name | Product Model | Descriptions |
XPON HGU 1GE+3FE+POTS+WIFI 2.4G | DFN-X2411SW | 1*GE,3FE Ethernet interface,1*RJ11,2*2.4G WIFI, 1*E/GPON interface, plastic casing, external power supply adapter 12V 1A MTK chipset & Bosa laser |
Wechat scan code follow us
24-hour hotline+86 158 1866 8650
Phone+86 193 7114 9959
